Event

Resources
Products
Solutions

8 years ago

Chris Browy of Avery Design Sits Down to Discuss Why Silvaco and Avery are Working Together

Silvaco just announced an agreement with Avery Designs for the distribution of Avery’s verification IP (VIP) for the MIPI I3C sensor interface protocol, which is used in smartphones, IoT devices

8 years ago

Simulation of Reliability and NBTI Aging in MOS Microelectronics

The continuous scaling of semiconductor devices is a driving force in the field of microelectronics. However, this miniaturization goes hand in hand with various undesired degradation effects, which make a

8 years ago

Silvaco Opens Shenzhen Office to Support Company’s Asian Expansion and Growing Demand for Semiconductor Design Solutions

February 26, 2019

8 years ago

Silvaco, Inc. and Avery Design Systems Partner to Deliver Complete CAN-FD Automotive and MIPI I3C IP and VIP Solutions

TEWKSBURY, MA. and SANTA CLARA, Calif., 25 February 2019 – Avery Design Systems Inc., a leader in verification IP, today announced its partnership with Silvaco, Inc. for distribution of Avery’s

8 years ago

Silicon Creations Relies on Silvaco’s Custom Design Flow for New Advanced FinFET Designs

January 28, 2019

,

8 years ago

TCAD Solution for Flexible Display

January 15, 2018 In this webinar, we review the basic elements of device design for flexible displays, including the key factors affecting device characteristics.

8 years ago

3D TFT Simulation of Grains and Grain Boundaries

Introduction Low-temperature polycrystalline silicon (LTPS) thin-film transistors have been widely applied to AMOLED (Active Matrix Organic Light Emitting Diode) as the most suit­able means for high mobility, high switching speed

8 years ago

Quantum Dot-Based Hybrid Light Emitting Diode Modelling Using Radiant

Introduction With the recently launched Radiant, a graphical user interface (GUI) for Atlas-based TCAD simulations, the entry barrier for inexperienced users has been lowered. In particular, the use of guided

8 years ago

Verification of an Compact Model for Organic Thin-Film-Transistors by Using MixedMode Creating an CMOS Inverter Circuit with TCAD Transistor Devices

Organic thin-film transistors (OTFTs) are promising devices for future low-cost electronics[1][2]. However, to enable the development of this technology, circuit design simulation is needed. TCAD with MixedMode approach provides a

8 years ago

Hints, Tips and Solutions – Movie and PDF Report Generation with the DeckBuild GUI

Introduction In this article we will emphasize two new features of the DeckBuild deck editing environment. These are the movie creation on the one hand and the creation of PDF

8 years ago

SPICE Model Generation by Machine Learning

by Thomas Blaesi

It was 1988 when I got into SPICE (Simulation Program with Integrated Circuit Emphasis) while I was characterizing a 1.5 μm Standard cell library developed by

8 years ago

Improving Memory on the Edge Using Octal Serial Flash Cache

This webinar will discuss the various solutions for storing and executing microprocessor code on a typical IoT system. Reducing power consumption, cost, and complexity without compromising performance is the charge