Requires: SmartSpice & Smartview

Minimum Versions: SmartSpice 3.16.12.R

The input deck shows how to use a G-device and a convex 3D-surface to generate current through the G-device.

The input deck shows how to use a complex 3D-surface with scattered set of points to determine current on the G-device.

Input Files

g_asrc_xyz_table_convex.in

* G-device: convex surface slice at y=0.5

Gdd1 2 1 TABLE 'v(3)' '0.5'  = (0, 0, 1) (0, 1, 1) (1, 0, 1) (1, 1, 1) (0.5, 0.5, 1.5)

r1 1 0 0.5K
r2 3 2 0.5k
vac 3 0 pwl 0 0 10n 1

.tran 1n 10n

.probe v(1)  v(2)  v(3) 
.probe i(r1) i(r2) i(vac)
.probe i(gdd1)
.plot  i(r1) 
.plot  i(gdd1)

.option nomod

.end

g_asrc_xyz_table_rnd.in

* G-device: scattered 3D surface determines a current on the device 

Gdd1 2 1 TABLE 'v(3)' 'v(3) ' = 
+ (0, 0, 0)
+ (0, 1, 0)
+ (1, 0, 0)
+ (1, 1, 0)
+ (0.260109, 0.219489, 0.124912)
+ (0.602771, 0.203772, 0.473006)
+ (0.00885037, 0.675832, 0.218009)
+ (0.389294, 0.776574, 0.263649)
+ (0.0761742, 0.910489, 0.405942)
+ (0.85345, 0.116123, 0.396146)
+ (0.991668, 0.348308, 0.49971)

r1 1 0 0.5K
r2 3 2 0.5k
vac 3 0 pwl 0 0 10n 1

.tran 1n 10n

.probe v(1)  v(2)  v(3) 
.probe i(r1) i(r2) i(vac)
.probe i(gdd1)
.plot  i(r1) 
.plot  i(gdd1)

.option nomod

.end