Customers

This article focuses on the use of Silvaco’s RFIC Design Suite including PDK, SmartSpice-RF, and Gateway.

HiSIM-1.2 parameter extraction methodology was discussed in detail in a previous issue of Silvaco Simulation Standard [1]. This article is meant to provide the precise UTMOST-III local optimization strategies to

1. Introduction BSIM1, the first model of the BSIM series was released about ten years ago. Some major improvements have been made since that time, making the BSIM3v3 and BSIM4

Customers are starting to use 64bit machines with large hard drives and Gigs of RAM and tend to forget the limitations imposed by a 32bit operating system. If you have

Expert’s Node Probing is powerful tool for inspection of netlist components on layout. It is designed for highlighting layout objects electrically connected with each others. The additional features of Node

Overview To extract parasitic capacitances from a circuit layout, you need to perform the following steps:

Expert layout editor version 4.0.1R has several new commands and functions released together with the new Qt GUI interface. Most of them are developed in order to improve easier operation.

Q. Every time I create a new project or library, an empty cell with the same name is created in my project. What do I need to setup to avoid

SILVACO has recently released a new suite of interconnect analysis tools to meet the demands of state of the art cell, circuit and chip design.

On the cutting edge of LSI design, the accuracy of Layout Parasitic Extraction (LPE) tools is a critical issue to miniaturized LSI design of rules measuring 0.13 um or lower.

When solving for the static CV curve for a MOS capacitor, due to the absence of current carriers, convergence can be a real problem. Previous methods suggested in the hints

Expert Parametric Wire (Pwire) is a complex group of objects containing, a single wire named master wire, any number of subparts such as enclosure wires, offset wires and sets of