Testimonials

Know how your circuit behaves across process variation before silicon tells you, with Monte Carlo-accurate results up to 30X faster. 

5 years ago

Victory Process (VP) uses two types of mesh to represent the structure: • The geometry mesh, which is used to represent the material regions. • The volume mesh, which is

June 29, 2021 | 10:00 am – 10:30 am (PDT) In this webinar you will learn how Silvaco Hipex-FS can help designers find that edge in performance and innovation with

5 years ago

June 24, 2021 | 10:00 am – 10:30 am (PDT) In this webinar you will learn how Silvaco Foundation IP helps you achieve your low power designs Memory compiler features

5 years ago

May 12, 2021 | 13:00-13:40 (JST) In this webinar, we will introduce CAAC-IGZOⓇ FET (c-axis aligned crystalline indium-gallium-zinc oxide FET) developed by Semiconductor Energy Laboratory Co., Ltd. (SEL) and the

5 years ago

Unlike conventional ohmic contact thin-film transistors (TFTs), contact-controlled TFTs [1], [2] rely on source energy barriers to produce a range of benefits including: low saturation voltages; extremely high intrinsic gain;

5 years ago

Welcome! Thank You for visiting our virtual booth at the 2021 TSMC Worldwide Technology Symposium. We hope you found the information useful and informative. Enter drawing to win an Amazon

5 years ago

June 3, 2021 | 10:00 am – 10:30 am (PDT) In this webinar, you will learn development & delivery of complete IO & ESD library in 5 weeks.

5 years ago

May 20, 2021 | 10:00 am – 10:30 am (PDT) In this webinar, a workflow that combines process and device TCAD to support the design of GaN-based LEDs is presented.

May 13, 2021 | 10:00 am – 10:35 am (PDT) In this webinar we will look at some of the effects to check when designing a flat panel.

6 years ago

In this article, the operation of avalanche photo-diodes in the medium gain, continuous operation mode is investigated. In other words, we are not considering diode operation in transient “Gieger” or

6 years ago

May 6, 2021 | 10:00 am – 10:35 am (PDT) In this webinar we will demonstrate how to set models for simulations, modify material and modeling properties, and calibrate