Every software package contains a full set of examples suitable for that version and are installed with the software. If you see examples here that are not in your installation you should consider updating to a later version of the software. These examples can be used by beginners and advanced users for product evaluation, teaching purposes, and self-training.
Required Modules
Victory Process
- 3D Structure Editor
Victory RCx
This example is identical to example VRCx_ex06.in except that the etching models have been upgraded to a more physical 87 degree side-wall. The same EXNOR custom cell layout is used and illustrates how VictoryRCx may be used to analyse the effect of the etching model on a complex custom cell.
The extracted netlist may be used in a SmartSpice input deck to analyse the circuit performance which can then be compared to the previous example.
When this example is loaded support files, that may be run in SmartSPice to show the circuit behaviour, will also be loaded.
It should be noted that the high resolution geometries created by the realistic physical process models used in this example require a usable memory of approximately 300MB to run the parameter extraction programs due to the intricate mesh thus created. The simulation can be run on machines with less memory but the program may take a significantly longer time to run due memory swapping between the RAM and hard disk.
Images
