1 month ago
VarMan XMA: full-chip memory yield analysis Estimate yield for the whole memory, not a slice of it. VarMan XMA rebuilds the full array and runs Monte Carlo across it, so
1 month ago
VarMan: statistical variation and yield analysis for analog, library and memory Know how your circuit behaves across process variation before silicon tells you, with Monte Carlo-accurate results up to 30X
1 month ago
Viso: Schematic Viewer for SPICE Netlist Files Load a parasitic netlist and see which nets the layout is hurting, and why, before you queue a long post-layout simulation. Talk to
1 month ago
Jivaro Pro: parasitic reduction for post-layout SPICE simulation Jivaro Pro cuts an extracted parasitic network down before you simulate it, so post-layout SPICE runs finish sooner, at an accuracy you
1 month ago
Hipex: full-chip rule-based RC parasitic extraction Hipex runs parasitic extraction on the full chip or only the nets you pick, then writes the resistance and capacitance your layout adds back
1 month ago
SmartDRC/LVS: physical verification for analog, digital and mixed-signal ICs Check a layout against your foundry’s rules and its own schematic, then debug the results in your layout editor. Talk to
1 month ago
Gateway: hierarchical schematic editor for analog and mixed-signal design Capture an analog, digital, mixed-signal or RF IC design once. Gateway netlists that one schematic for simulation, layout and LVS, so
1 month ago
Expert: hierarchical analog layout editor for mixed-signal and RF ICs Analog layout, checked against design rules while you draw it. The editor opens designs larger than 10 GB in minutes.
1 month ago
Circuit Rubberband: real-time circuit tuning in SmartSpice Change a model or device parameter and watch the waveforms answer, so you settle the value in one sitting, not one rerun at
1 month ago
SmartSpice RadHard: radiation effects circuit simulation Find out if your circuit survives a particle strike or a dose-rate pulse while it’s still a netlist, not after it fails a radiation
1 month ago
SmartView: waveform viewer and analysis for circuit simulation A waveform viewer that measures what it plots, whether the result is streaming live from SmartSpice or sitting in an HSPICE, Spectre
1 month ago
SmartSpice Pro: FastSPICE simulation for SRAM and display designs Transient simulation for memory arrays and TFT display panels with millions of elements. Results stay close to SPICE accuracy, on the