Testimonials

Minimum Required Versions: Expert 5.2204.3.R, Hipex 3.8.7.R Parasitic resistor and capacitor extraction using Hipex RC is not limited to 90-degree Manhattan layout geometries. Hipex can accurately extract layout parasitic devices

Minimum Required Versions: Expert Expert 5.2204.3.R, Hipex 3.8.7.R, Guardian 4.8.36.R Hipex-RC provides ways to reduce the size of a parasitic RC netlist for post layout simulation of a large layout

Minimum Required Versions: Expert 5.2204.3.R, Hipex 3.8.7.R Hipex RC is capable of extracting parasitic resistance and capacitance with high accuracy using complex routines that are employed in the design kits

Minimum Required Versions: Expert 5.2204.3.R, Hipex 3.8.7.R As process technology are getting smaller (90 nm and below), well proximity and shallow trench isolation (STI) stress effects play a more significant

Minimum Required Versions: Expert5.2204.3.R, Hipex 3.8.7.R The example circuit for Analog(RF) netlist extraction is the Low Noise Amlpifier (LNA) shown at figure1 . This single ended cascode design uses three

Minimum Required Versions: Expert 5.2204.3.R, Hipex 3.8.7.R Generally, a parasitic RC netlist contains much more devices than the original netlist without the parasitic RCs elements. This leads to large netlist

Minimum Required Versions: Expert 5.2204.3.R, Hipex 3.8.7.R Hipex-RC allows to customize the extraction routine for parasitic capacitances. The customization is provided by using procedures written in LISA or JavaScript. The

Minimum Required Versions: Expert 5.2204.3.R, Hipex 3.8.7.R In the normal operation, Hipex-RC treats all dummy metal patterns as the normal conductor (the same way as interconnect wires). It causes a

Minimum Required Versions: Expert 5.2204.3.R, Hipex 3.8.7.R This example demonstrates running Hipex Parasitic Capacitance Extraction using Victory RCx (VRCx) Field Solver. The functionality is available for Linux only. 1: Start

Minimum Required Versions: Expert 5.2204.3.R, Hipex 3.8.7.R This example demonstrates running Hipex Parasitic Capacitance Extraction in Domain Decomposition mode using Field Solvers. The functionality is available for Linux only. The

Minimum Required Versions: Expert 5.2204.3.R, Hipex 3.8.7.R This example demonstrates running Hipex Parasitic Capacitance Extraction using VictoryRCx and Stellar Field Solvers for different areas of the same layout, and combining

Minimum Required Versions: Expert 5.2307.0.R, Hipex 4.2307.0.R, SmartDRC 1.2307.0.R Prior to performing parasitic RC extraction, Hipex executes netlist (connectivity/device) extracion. Hipex netlist extraction creates Hipex Database (HDB) serving as source