Clever Examples
- clex01.in : Metal Elbows with Manhattan Geometry
- clex02.in : Metal Elbows with Etch Models
- clex03.in : Metal Elbows with Lithography Models
- clex04.in : Metal Elbows with Etch and Lithography Models
- clex05.in : Resistance of Metal Fork
- clex06.in : EXNOR Cell with Manhattan Geometry
- clex07.in : EXNOR Cell with Physical Geometry
- clex08.in : Inverter Cell with Manhattan Geometry
- clex09.in : Inverter Cell with Physical Geometry
- clex10.in : Inverter Cell with Lithographic Geometry
- clex11.in : SRAM Cell with Multiple Metals and Dielectrics
- clex12.in : Performing a 2D Interconnect Simulation in Clever
- clex13.in : Local Interconnect - MOS Current Source
- clex14.in : Non Planarized, Low k Dielectric Capacitance Analysis
- clex15.in : Local Oxidation (LOCOS)
- clex16.in : SRAM Analysis for Back Annotation into SPICE model
- clex17.in : Creating the clex16 SRAM structure in Victory Process
- clex18.in : GDS2, netlist reduction and contact statement
- clex19.in : Mesh Refinement
- clex20.in : Simulating Micro-Loading Effects using Advanced Etching
- clex21.in : Calculating Well Isolation and Source/Drain Capacitance
- clex22.in : Liquid Crystal (LCD) Field Dependent Capacitance
- clex23.in : Optical Simulation of Liquid Crystal in the In-plane Switching (IPS) Mode
Rev. 14121
Additional Info:
These examples are for reference only. Every software package contains a full set of examples suitable for that version and are installed with the software. If you see examples here that are not in your installation
you should consider updating to a later version of the software.