Victory Mesh versions 1.7.2.C and later include two new commands that can be used for complex shape genera-tion. The path and follow commands can be used together to generate surface meshes of general shapes based on fixed cross sections.

PathThe path command connects a sequence of vertices via edges. The command operates in line or Bezier modes. In the line mode the from/to parameters are used to define the start and end of an n-dimensional line segment, for example:

We detect a local maximum in the design space of a pseudomorphic-channel high electron mobility transistor (PHEMT). The design has an OIP3  linearity figure-of-merit that is 10-15 dBm above the baseline for a similar 1 mm width control device, and is achieved at a gate bias on the order of 100 mA/mm or less, where the ratio of transconductance to the bias current gm1/ID is particularly large (7 volt-1).