• TCAD Examples

    TCAD Examples

mos2ex27.in : 3D Cylindrical Nanowire

Requires: Victory Process, Victory Mesh, Victory Device
Minimum Versions: Victory Process 7.58.2.R, Victory Mesh 1.8.2.R, Victory Device 1.18.0.R

By default Victory Process and Device run on just one processor. To ensure better perfomance on your computer the following simulation condition simflags="-P all" could be specidied in the go line starting Victory Process or Device. This means that all processors available will be used. If you want to use a smaller number of processors you can substitute "all" with a desired number, e.g. simflags="-P 4".

In this example, a Cylindrical Nanowire is created using the Victory Process structure editor.

The structure created by Victory Process is then meshed in Victory Mesh using a full 3D Delaunay mesh and is then transferred to Victory Device for electrical analysis of the unsaturated Vt curves as well IdVd curves

The device simulation uses the energy balance model to account for the effects of ballistic carrier transport , which significantly increases the drain current.

It also uses the Bohm Quantum Potential (BQP) model to take into account quantum confinement of carriers in 3 dimension which significantly decreases the drain currents.

For comparison purpose Drift Diffusion alone is also included in the simulation

To load and run this example, select the Load button in DeckBuild > Examples. This will copy the input file and any support files to your current working directory. Select the Run button in DeckBuild to execute the example.

Input Files
Output Results
These examples are for reference only. Every software package contains a full set of examples suitable for that version and are installed with the software. If you see examples here that are not in your installation you should consider updating to a later version of the software.
Copyright © 1984 - Silvaco, Inc. All Rights Reserved. | Privacy Policy